New Grandparents

Dear friends of ours became grandparents for the first time.  Such moments in life need celebrating, so I decided to make two rocking chairs for the new grandparents.

My apologies in advance as this is a long post, with lots of photos.

The die used:  Sizzix ScoreBoards XL Die - Chair, 3-D #658985

All the pieces cut, ready for assembly

The seat piece, with double sided tape

Folded along the score lines

The seat ready to be glued to the chair back

I made a book and some glasses for grandad’s chair and some knitting for grandma’s.

All done!!  Ready to be given in their handmade acetate boxes.

NB:  Opa = Grandad  Oma= Grandma/Nan

Get well – part 2

This is the second get well card – a shaker card.

I used a dark cream pearly card blank and cut the aperture in a matching, smaller piece of card using Sizzix Framelits with stamps, Jar #658699.  I then embossed the card using Sizzix Textured Impressions Hearts #4 – #656797.   The corners on the card blank and the smaller piece were shaped using a punch.

Using the stamp from the set, I stamped the jar on a white piece of card.  I place a piece of acetate behind the aperture on the smaller piece of card.  Foam blocks were used to ‘seal’ around the jar to stop the punched hearts falling out.  The greeting was computer generated and printed on white card, then cut using Sizzix Framelits, Banners, Fancy #658601

A very special Christmas card

I really enjoyed making this special Christmas card.

The gold card blank is die cut using the square panel from the Sizzix die set #660845 – Thinlits plus Card, diorama Gatefold.  I use this die set a lot as it is so versatile.

The poinsettia is made using the Sizzix Thinlits die #658865.  Having assembled the card, I decided it needed a box to finish it off (oh, and it wouldn’t fit in an envelope!).

I find box making a bit of a challenge but this one was OK – I even managed an acetate window.

New Arrival–Part 1

Today, I met my friend’s grandson for the first time.  He is absolutely adorable and I was thrilled to be able to have a cuddle.

I made the card & gift before his arrival, so I kept to neutral colours.  Today I will show you the card and tomorrow I will post pictures of the gift.

I wanted to try making a 3d crib.  I mapped it all out first and then transferred my pattern to the white card.  I drew and cut the crib by hand.  I could have used my Craft Robo but never having made anything like this before, I wanted to get a “feel” for it.

Having constructed the crib, I lined the inside with some yellow and white stripey paper, made a pillow from a small piece of white card and a blanket from yellow gingham ribbon.

 

 

I then decided to make a box.  Again, I could have used the robo to design & cut it but I decided to do it by hand.

Having cut my desired shape I then stamped the card with “precious baby”.

To protect the crib, I added acetate to the apertures.

I then made a tag so that I had somewhere to write my message.

 

A pair of knitted bootees (another of my makes!) and a yellow gingham bow either side to hold the box together and it’s done.

Wedding time

A colleague of DH is getting married next week. The date and time have been carefully chosen - 09-08-07 at 6.05pm giving the following: 9-8-7-6-5!! How memorable.


Once again it back to the drawing board to come up with something different.


Chosing my materials was the easy bit (for a change), the design took longer and this is what I came up with.



















I cut an oval aperture in a pearly white card and used acetate to fill the gap.
The flowers were made with my favourite flower punch. The cake was made from an envelope stiffener, finished off with die cut hearts. It was my first time using acetate and I found it a challenge with the glue but all in all I was pleased with the results.